Hardware connection tips / hints – FieldServer NCA2-NFS2-3030 User Manual
Page 5
Advertising
FS-8700-130 Notifier NCA2/NFS-3030 Manual
Page 5 of 21
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: [email protected]
3.1
Hardware Connection Tips / Hints
The FieldServer should preferably be connected to the TB5 Printer port. It is theoretically possible to
connect to the TB5 CRT port, but this has not been fully tested.
The Panel’s port must be enabled and set to 80 Columns Not Supervised.
Advertising
This manual is related to the following products: