FieldServer NCA2-NFS2-3030 - Manual (Page 6)

FS-8700-130 Notifier NCA2/NFS-3030 Manual Page 6 of 21
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: [email protected]
4 DATA ARRAY PARAMETERS
Data Arrays are “protocol neutral” data buffers for storage of data to be passed between protocols. It is necessary
to declare the data format of each of the Data Arrays to facilitate correct storage of the relevant data.
Section Title
Data_Arrays
Column Title
Function Legal Values
Data_Array_Name Provide name for Data Array
Up to 15 alphanumeric
characters
Data_Array_Format
Provide data format. Each Data Array can only take on
one format.
FLOAT, BIT, UInt16, SInt16,
Byte,
Packed_Byte,
Swapped_Byte
Data_Array_Length
Number of Data Objects. Must be larger than the data
storage area required by the Map Descriptors for the
data being placed in this array.
1-10, 000
Example 1
// Data Arrays
Data_Arrays
Data_Array_Name , Data_Format , Data_Array_Length
DA_SYS_N2
, Sint16 , 508
DA_N2L01D , BIT , 1749
DA_N2L01D_T , Sint16 , 159
DA_N2L01M , BIT , 1749
DA_N2L01M_T , Sint16 , 159
DA_N2_PANEL , BIT , 1056
DA_N2_PANEL_T , Sint16 , 96
DA_N2_BELL_T , Sint16 , 4