Using the defined area option (continued), Using the defined area option (continued) -59 – Fargo DTC300 User Manual
Page 169
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
5-59
Using the Defined Area Option (continued)
Step Procedure
4
Measure from the lower left corner of the card up and over to the lower left
corner of for the defined area to begin and enter these values into the X and Y
boxes. (Note: The card grid lines are spaced at .2 inch / 5mm intervals.)
Continued on the next page
Advertising