Fargo DTC300 - Manual (Page 18)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 2-4
Technical Specifications (continued)
Type Description
Humidity 20-80% non-condensing
Interface USB 1.1
Memory 2MB RAM
Operating
Temperature 65° to 80° F / 18° to 27° C
Print Area DTC400/DTC300/DTC300M: CR-80 edge-to-edge
Printer
Drivers Windows 98SE, Me/2000/XP
Print Method • DTC400/DTC300: Dye-Sublimation/Resin Thermal Transfer
• DTC300M: Resin Thermal Transfer
Print Speed • DTC400/DTC300: 30 seconds per card / 120 cards per hour
(YMCKO)
• DTC300M: 5 seconds per card / 720 cards per hour (K)
(Note: Indicates the print Ribbon type and the number of Ribbon panels
printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, B=Dye-
Sublimation Black and O=Overlay.)
• Print speed is measured from the time a card feeds into the Printer to
the time it ejects from the Printer.
• Print speeds do not include the time needed for the PC to process the
image.
• Process time is dependent on the size of the file, the CPU, amount of
RAM and the amount of available resources at the time of the print.
Resolution 300 dpi (11.8 dots/mm)
Continued on the next page