Grizzly G7945 - Manual (Page 18)

-16-
G7945/G7946 Radial Drill Press
The unpainted surfaces are coated with a waxy
oil to protect them from corrosion during ship-
ment. Remove this protective coating with a sol-
vent cleaner or citrus-based degreaser such as
Grizzly’s G7895 Degreaser. To clean thoroughly,
some parts may need to be removed.
For opti-
mum performance from your machine, make
sure you clean all moving parts or sliding
contact surfaces that are coated. Avoid chlo-
rine-based solvents, such as acetone or brake
parts cleaner, as they may damage painted sur-
faces should they come in contact. Always follow
the manufacturer’s instructions when using any
type of cleaning product.
Clean Up
Gasoline and petroleum
products have low flash
points and could cause
an explosion or fire if
used to clean machinery.
DO NOT use gasoline or
petroleum products to
clean the machinery.
Many of the solvents
commonly used to clean
machinery can be toxic
when inhaled or ingest-
ed. Lack of ventilation
while using these sol-
vents could cause seri-
ous personal health risks
or fire. Take precautions
from this hazard by only
using cleaning solvents
in a well ventilated area.
Floor Load
Refer to the Machine Data Sheet for weight and
footprint specifications for your machine. Some
residential floors may require additional reinforce-
ment to support both the machine and operator.
Some workbenches may require additional rein-
forcement to support both the machine and the
workpiece.
Working Clearances
Consider existing and anticipated needs, size of
material to be processed through each machine,
space for auxiliary stands, work tables or other
machinery, and the great range of movement
in the Model G7946/G7946 when establishing
a location for your machine. See
Figure 6 for
the minimum working clearances of the Model
G7945/G7946.
Unsupervised children and
visitors inside your shop
could cause serious per-
sonal injury to themselves.
Lock all entrances to the
shop when you are away and
DO NOT allow unsupervised
children or visitors in your
shop at any time!
Site Considerations
Figure 6. Working clearances.
�����
���
�����
�����
G7945 G7946