Grizzly G7945 - Manual (Page 9)

G7945/G7946 Radial Drill Press
-7-
The information contained herein is deemed accurate as of 11/25/2005 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2 Model G7946
Other Related Information
Base Length.........................................................................................................................................17-1/2 in.
Base Width...........................................................................................................................................10-1/2 in.
Quill Diameter........................................................................................................................................0.575 in.
Depth Stop Type...........................................................................................................................................Hub
Column Diameter.................................................................................................................................. 2.790 in.
Mobile Base..............................................................................................................................................G8683
Spindle Information
Spindle Taper............................................................................................................................................JT#33
Spindle Travel........................................................................................................................................ 3-1/4 in.
Dist From Spindle To Column.........................................................................................................5-1/2 - 17 in.
Dist From Spindle To Table................................................................................................................. 30-1/2 in.
Dist From Spindle To Base........................................................................................................................ 51 in.
Table Information
Table Diameter...................................................................................................................................12-3/16 in.
Table Thickness........................................................................................................................................... 1 in.
Floor To Table Height................................................................................................................... 22-1/2 - 48 in.
Vertical Table Movement................................................................................................ Crank Handle Operate
Table Swing.......................................................................................................................................... 360 deg.
Table Tilt.......................................................................................................................... Left and Right 90 deg.
Table Swivel Around Center................................................................................................................. 360 deg.
Table Swivel Around Column................................................................................................................360 deg.
Maximum Movement Of Work Table....................................................................................................24-1/2 in.
No. Of T Slots....................................................................................................................................................6
T Slot Width...............................................................................................................................................5/8 in.
T Slot Length..........................................................................................................................................3-1/4 in.
Operation Information
Swing................................................................................................................................................... 33-1/2 in.
Drilling Capacity........................................................................................................................... 1/2 in. in Steel
No Of Spindle Speeds.......................................................................................................................................5
Range Of Spindle Speeds..............................................................................550, 880, 1520, 2490, 3470 RPM
Drill Chuck Type....................................................................................................................... JT33 Key Chuck
Drill Chuck Size......................................................................................................................................... 5/8 in.
Other Specifications:
Country Of Origin ................................................................................................................................................China
Warranty ............................................................................................................................................................ 1 Year
Serial Number Location ................................................................................................................Data Label on Head
Awards .............................................................................. Popular Woodworking Editor's Choice Tool Buying Guide
Assembly Time ........................................................................................................................................... 30 minutes
Features:
Threaded Depth Stop
Table Has Lock Levers
Cushioned Grip Quill Handles
Crank Handle Operated Rack and Pinion Vertical Table Movement
Table and Base are Cast Iron
5 Speeds
1/2HP Motor
Radial Design Allows Angle Drilling
1/8" -5/8" Chuck