Golden Technologies ALANTE GP201SS - Manual (Page 13)

Alante´ GP201 Manual Revised 060208
13
ASSEMBLY
Your Alante´ ™ is shipped partially disassembled in order to maximize the
protection of all its parts during the shipping process. Please follow the
instruction below to quickly and easily assemble the power chair for your
use.
NOTE: You will need only basic tools. If you do not have the
required tools, or if you do not feel capable of safely assembling your
power chair, please contact your local Golden Technologies, Inc.
representative.
Tool List
1. 13mm combination wrench
2. Two 10mm open or combination wrench
3. 6mm hex socket key
4. 4mm hex socket key
5. ¼ inch hex socket key
Main Components
1. Base frame with connector for battery and motor cables
2. Shroud
3. Seat Assembly with lap belt
4. Joystick controller
5. Batteries (2) (must purchase separately)
6. Battery Cables
Figure 2
Shroud
Base Frame
Seat w/Lap Belt
Batteries
Joystick
Controller