Golden Technologies ALANTE GP201SS - Manual (Page 22)

Alante´ GP201 Manual Revised 060208
22
COMFORT SETTINGS Cont.
FOOTREST HEIGHT ADJUSTMENT
1) Remove the shroud
2) Use an Allen
™
wrench to remove the bolts indicated in Figure 20.
3) Slide the footrest to the desired height.
4) Align the bolt holes in the footrest and the footrest bracket.
5) Install and tighten the bolts.
Figure 20
FOOTREST EXTENDING
1) Lift the rubber pad from the footrest plate.
2) Loosen the two (2) footrest adjustment screws.
3) Slide the footrest plate to the desired position and tighten the
adjustment screws.
NOTE: The maximum extended length is not at the end of the slots.
Figure 21