Golden Technologies ALANTE GP201SS - Manual (Page 24)

Alante´ GP201 Manual Revised 060208
24
OPERATION
Your Alante´ ™ is simple to operate. However, for your safety and the
safety of others, Golden Technologies, Inc. recommends that you
carefully read and understand the following operating instructions. We
also recommend that you practice operating your Alante´
™ in an area free
of any obstacles. Once you have gained confidence in your ability to
control your power chair, you will more easily be able to operate it in nor-
mal daily conditions.
A WORD OF CAUTION
Before turning on the power of your Alante´, take note of your
environment and set your speed control accordingly. (see “Speed Control
Buttons” Figure 25) For indoor driving, we recommend that you select
the lowest speed setting. For outdoor driving, we recommend that you
select a speed setting at which you feel comfortable, safe, and in control
of your power chair. Familiarize yourself with the features of your
Alante´ described below and follow the instructions to safely operate your
power chair.
Joystick Controller Display
The joystick controller display (See Figure 25) is a multifunctional visual
display. This display provides three types of information.
1) On/Off status
2) Battery charge level
3) Fault diagnostics
1. On/Off Status
When you turn on the power to your Alante´, the LED array will
light up (see Figure 25).
To turn the power on, press the on/off button (see Fig. 25).
To turn the power off, press the on/off button (see Fig. 25)
♦ If the LED array is not lit, the joystick controller and the
power chair are not in operating mode.