GIGABYTE M1405 - Manual (Page 37)

English
27
M1405 SERIES USER’S MANUAL
3G:
Press the 3G icon to enable/disable 3G device. (Optional)
Camera:
Press the camera icon to turn on/off Webcam power.
Smart Charge:
Press the Smart Charge icon to select different power
supplying mode (30%, 40%, 50% or Off) when using USB
power. * (Optional)
Screen Output Setting:
Press the camera icon to turn on/off Webcam power.
Windows Docking Gadget:
Press the Docking Gadget icon to activate Docking
Gadget.
Smart Turbo:
Press the Smart Turbo icon to enable/disable Smart Turbo
function. **
* The Introduction of GIGABYTE Smart Charge Function
The GIGABYTE Smart Charge allows you to charge your digital
devices through USB ports while the computer is in the sleep mode.
When your computer is powered through an AC adapter by direct
AC power supply, you will be able to use Smart Charge when the
computer is in Off/Sleep/Hibernation mode. However, if the battery
pack is the sole power supply for your computer, Smart Charge only
works in Off/Hibernation mode.
To ensure sufficient power supply for system operation, you can
set the computer (via GIGABYTE Smart Manager) to automatically
cease this function at 50/40/30% of power level.
(Note: Smart Charge function is available in selected models.)
** The Introduction of GIGABYTE Smart Turbo Function
The enhanced system performance can be realized by the exclusive
GIGABYTE Smart Turbo over-clocking technology. You can switch
on/off the Turbo Mode through GIGABYTE Smart Manager user
interface, Note that such setting will require a system reboot to
be effective. You can also choose “Start with Smart Turbo Mode”
through our Smart Setup button to enjoy Turbo Mode during the
current working session without system reboot. However, once
reboot, the system will switch on/off the Turbo Mode according to
your setting in GIGABYTE Smart Manager.