GIGABYTE M1405 - Manual (Page 49)

English
39
M1405 SERIES USER’S MANUAL
7.2 Top View: Docking Station
The below image shows the top of the docking station.
When placing the notebook into the docking station is
sure to align the connection ports on the notebook and the
docking station.
1 2
3
4
5
# Item Description
1 Air Vent
This vent is used to allow the vent on the
rear of the notebook to expel the hot air
from the system without restrictions from
the docking station. Please be careful not to
block this port.
2 Docking Port
Connector
The docking port is used to interface
between the notebook and the station itself
allowing control and connectivity. This port
is very fragile. Care must be taken when
connecting and disconnecting.
3 Un-Docking
If the docked computer is on, press “Un-
Docking” button to initiate the un-docking
process.
4 Power Button
The Power On / Off button can switch on
and shut down the attached notebook.
5 Power LED The On / Off status is shown by the LED.
The (1) Symbol in the image above shows the dipped area
where the CPU Fan Vent will be aligned when docked. The
section is like this to allow flow of air to the systems fan.
Please ensure that this section remains free from obstruction
to allow the notebook to adequately cool itself.