GIGABYTE M1405 - Manual (Page 54)

English
44
7.8 How to: Connect an External DVI Display
Connect an External DVI Display
To insert the cable, simply line it up with the port on the back of the
dock and press it into the port securely. Tighten the two securing
screws so as to ensure that the cable stays connected.
Disconnect an External DVI Display
To remove the cable simply loosen the securing screws and grab
the head of the cable and gently pull it out of the dock, ensuring that
the port is no longer active with a display out-put. DO NOT pull by
the cable itself is this can damage the display cable of the monitor
or projector or display device.
7.9 How to: Connect a USB Devices
Connect a USB Device
To connect a USB device simply line it up with the USB port on the
unit and press it into the port securely. It will only go in one way
because of the notching used so ensure that it is lined up correctly
and do not force the USB connector into the port if it does not want
to go in. USB Devices support Plug and Play and should auto
discover once detected within the operating system.
Remove the USB Device
To remove the device, look for the Safely Remove Hardware icon
on the taskbar and open the tool by double clicking with the left
mouse button. Select the dive you would like to remove and click
on stop, and windows will then let you know that it is safe to remove
the device, and then pull the cable out of the port. If there is no
notebook installed on the docking station you will be able to pull the
cable out without needing to follow the Safety Remove steps.