GIGABYTE M1405 - Manual (Page 50)

English
40
7.3 Rear View: Docking Station
The below image shows the rear of the docking station. All of the
interface ports for peripherals are on the rear of the docking station.
Please refer to the below image to see placement of the ports.
1
2 3 4 5
# Item Description
1 Air Vent
This vent is used to allow the vent on the rear
of the notebook to expel the hot air from the
system without restrictions from the docking
station. Please be careful not to block this port.
2 DC-In Jack
The DC Jack is used to connect power to the
dock to power the ports on the station itself
as well as to charge the units battery and
power the graphics.
3 RJ-45 LAN Port
The LAN Port is used to connect the Docking
Station and docked notebook to a wired network.
The port is capable of speeds up to 1Gbps.
4 USB Ports
The Docking Station has a total of 6 available
ports for peripheral connections and the ports
are USB 2 Compliant (USB 2.0).
5 VGA D-Sub Port
The VGA D-Sub port is used to connect an
external analogue monitor to the docking
station. These can be CRT, LCD or TV
Displays.
7.4 Side Views: Docking Station
The below image shows the Left and Right sides of the GIGABYTE
Docking station. Please refer to the below images for reference to
ports / connectors.
Left Side View
The left side of the docking station has the following:
1 2 3 4
# Item Description
1 HDMI Port
For connecting High Definition Monitors and
TV's/Panels.
2 DVI Port For connecting Digital LCD Monitors.
3 Mic-in Jack For connecting an external Microphone.
4 Audio Jacks
For connecting External Speakers/
Headphones.