GIGABYTE M1405 - Manual (Page 51)

English
41
M1405 SERIES USER’S MANUAL
Right Side View
Notebook Release Arm
(Ejector Switch)
The right side of the docking station has the Notebook Release Arm;
this is pulled to unlock the notebook from the docking station.
7.5 Attachment
Attachment: The AC Adaptor
Connect the AC adaptor to ensure that the Docking Station is
powered. A number of ports on the docking station also use the
power to operate. It will also enable the charging of the notebook
battery pack when the unit is attached to the docking station.
The AC adaptor can be connected to any power source supplying
from 100 to 240 volts and 50 or 60 hertz. This allows the AC adaptor
to work in most countries and regions.
It is recommended to use only the AC adaptor supplied in the
box with the ˇDocking Station and any AC adaptor approved by
the supplier. Using any other adaptor could cause damage or
malfunction and might result in injury.
1
2 3
1. Connect the power cord to the AC adapter.
2. Connect the AC adaptor to the DC-in Jack on the left side of the
rear of the docking station.
3. Connect the power cord to the power outlet.