GIGABYTE M1405 - Manual (Page 39)

English
29
M1405 SERIES USER’S MANUAL
5.3 GIGABYTE Smart Setup
During the off mode, press SMART button to enter “Smart Setup”
menu. You can choose BIOS Setup Utility, System Recovery, and
other functions in this setup menu.
Press”Continue to OS” button to enter operating system.
Press”BIOS Setup Utility” button to enter BIOS setup utility.
Press”System Recovery” button to enter GIGABYTE Xpress Recovery.
Press”Shutdown” button to shutdown the system.
5.4 GIGABYTE Utility Driver Disc
The GIGABYTE M1405 Comes with a Driver and Utilities Disk
should you need to reinstall any drivers, or if you are installing
the operating system because it did not ship with the notebook. If
the M1405 shipped with an installed operating system the drivers
should be present.
Before installing drivers, check on the notebook and with the
supplier as to whether they have already installed all the drivers with
the operating system, if not, please follow the steps below:
1. You can find the Utility Driver CD like the one shown below: Your
Driver CD might differ in look to the one below and it will have the
same notebook model on the Driver CD.
2. Put the CD into the optical device. An installation screen will
appear. You can then install all or the needed drivers from the
interface.
M
Version 3.0
1305.1405