GIGABYTE M1405 - Manual (Page 45)

English
35
M1405 SERIES USER’S MANUAL
6.7 WWAN 3G Connection
The M1405, depending on configuration, features a WWAN 3G
Connection. This section will briefly explain how to install and set up
the WWAN 3G unit if it did not ship with your M1405.
If you purchased the GIGABYTE WWAN 3G Module separately you
should have these items in the package:
„ 1x WWAN 3G Mobile Broadband Card
„ 1x Driver CD
„ 1x Quick Installation Guide
To install the 3.5G Mini Card please follow these steps, however
if you are not comfortable doing so, please contact the supplier
to install the Module for you. Ensure the M1405 is off before
proceeding:
1. Remove the Comm. Bay cover shown above to reveal the Mini
Card slots. There should be one open slot available.
2. Line up the 3.5G mini card with the slot, making sure to check the
alignment of the notch, and press the card into the slot.
3. There should be an antenna plug available to plug into the mini
card to allow for signal reception and transmission - Plug this into
the port on the card. Follow the software installation steps on the
next page.
4. The SIM card slot is under the battery in the battery bay. Follow
the How To Remove Battery guideline to gain access to the slot
and then install the SIM card.
1
2
4
3