GCC Printers 2018 - Manual (Page 19)

Initial Scanner Setup
13
2
❖ ❖ ❖ ❖ Orig. Orientation Priority
Select the default for original
placement orientation. When orig-
inals are always positioned the
same way, select that orientation
as the default to make operation
easier.
Reference
p.31 “Original Orientation and
Scan Area”
❖ ❖ ❖ ❖ Original Type Setting
Select the original type registered
in [Type 1(Text):] or [Type 2(Photo):].
The original type that can be regis-
tered is as follows:
• Text (Print)
For standard originals contain-
ing mainly text (for print)
• Text (OCR)
For standard originals contain-
ing mainly text (for OCR)
• Text/Photo
For originals containing a mix-
ture of text and photographs
• Photo
For originals containing photo-
graphs and other pictures
Note
❒ You can register “Text (Print)”
or ”Text (OCR)” in [Type 2(Pho-
to):]
, or “Text/Photo” or ”Pho-
to” in [Type 1(Text):].
❒ Printer printing is best
scanned with Text (Print).
Text (OCR) is suitable for
higher OCR accuracy.
Selecting a custom size
When selecting [Custom Size] as the
scan size, follow the procedure be-
low.
AAAA
Select [Custom Size] on the Scan
Size screen using the scroll keys,
and then press the
{{{{OK}}}} key.
BBBB
Enter the width of the original us-
ing the number keys.
Enter the value in [Horiz.], and then
press the
{{{{OK}}}} or {{{{#}}}} key.
CCCC
Enter the height of the original
using the number keys.
Enter the value in [Vert.], and then
press the
{{{{OK}}}} or {{{{#}}}} key.
The range of possible dimensions
for original sizes is as follows:
• Original Size
Horiz.: 128 - 432 mm(5.1” - 17.0”)
Vert.: 105 - 297 mm(4.2” - 11.6”)
The “
Programmed ” message ap-
pears, and then the Scan Size
screen returns.
DDDD
Press the
{{{{User Tools/Counter}}}} key.