GCC Printers 2018 - Manual (Page 30)

Preparations for Use as a Network Scanner
24
2
ScanRouter V2 Lite
ScanRouter V2 Lite is to be installed on the delivery server. Scan files can be sort-
ed in the delivery server, stored in specified in-trays, or saved in folders of client
computers on the same network.
Reference
See ScanRouter V2 Lite Help or the manuals for ScanRouter V2 Lite.
❖ ❖ ❖ ❖ File storage folder
The files are stored in the following folder on the CD-ROM provided with this
machine:
\UTILITY\ROUTERV2
❖ ❖ ❖ ❖ System requirements
Limitation
❒ When installing the software in Windows NT Server or Windows 2000
Server, a stand-alone server must be used. Do not use the primary domain
controller or backup domain controller.
❒ If you install this software in an operating system, such as Windows NT
Workstation and Windows 2000 Professional, in which a client server is
not permitted to be used in a network, you may violate the license agree-
ment of Microsoft Corporation.
• Hardware
PC/AT compatible
• CPU
Pentium 200 MHz or faster (Pentium II 350 MHz or faster recommended)
• Operating system
Microsoft Windows 95 (OSR 2 or later)
Microsoft Windows 98
Microsoft Windows Millennium Edition
Microsoft Windows 2000 Professional (Service Pack 1 or later)
Microsoft Windows 2000 Server (Service Pack 1 or later)
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Microsoft Windows NT Workstation 4.0 (Service Pack 5 or later)
Microsoft Windows NT Server 4.0 (Service Pack 5 or later)
• Memory
64 MB or more (128 MB or more recommended)
• Hard disk space
Minimum free space required for installing: 200 MB
Note
❒ In addition to the space required for installation, the hard disk should
have at least 500 MB of free space for files.
• Network protocol
TCP/IP