GCC Printers 2018 - Manual (Page 37)

Original Orientation and Scan Area
31
3
Original Orientation and Scan Area
To correctly display the top/bottom
orientation of a scanned original on a
client computer, original orientation
must be set when placing the original.
When using the e-mail function or the
network delivery scanner function,
settings are made on the control panel
of the machine. When using the ma-
chine as a network TWAIN scanner,
settings are made with the TWAIN
driver.
Note
❒ The difference between scanning
with the TWAIN scanner function
and the e-mail function or the net-
work delivery scanner function is
shown in the following table.
For E-mail and a Network
Delivery Scanner
AAAA
To make settings for original ori-
entation, one-sided/two-sided
combination, and mixed original
sizes, press [Options].
Note
❒ The default can be changed us-
ing the initial scan settings [Orig-
inal Setting]
, [Mixed Orig. Sizes
Priority] , and [Orig. Orientation Pri-
ority] . See p.12 “Scan Settings”.
TWAIN Scanner E-mail/Network
Delivery Scanner
A
u
to
D
etect N
o
n-Mixed Origina
l
S
iz
es
A whole batch
of originals is
scanned using
the size of the
first original. Auto detection
is used to deter-
mine the size of
each original
placed on the
exposure glass.
A batch of origi-
nals placed in
the ADF is
scanned using
the size of the
largest original
placed.
A
u
to
D
ete
ct
M
ix
ed
O
ri
g
in
al
S
ize
s Auto detection is used to deter-
mine the size of each original.
S
iz
e S
p
ecifica
tion
When an original is smaller than
the specified size, a blank space ap-
pears in the resulting image.
TWAIN Scanner E-mail/Network
Delivery Scanner