Dwarning d – Gaggenau CM200610 User Manual
Page 16
16
q Push down the sleeve a on nozzle.
q Fill a cup approx.
1
/
3
full of milk.
q Immerse nozzle approx.
3
/
4
(1 cm) into the milk.
q Slowly rotate function selector to =.
The appliance now heats up for approx.
20 seconds. Then the milk is frothed.
d
WARNING
d
Avoid the risk of scalding!
When the function selector is set
to =, the nozzle may spurt slightly.
Escaping steam is very hot. Do not
touch nozzle or direct at people!
q The frothy milk can be optimized by rotating the
cup slowly.
q End the process by rotating the function selector
backĂto u position.
Note: When nozzle has cooled down, clean
immediately. ć see Cleaning the appliance / Cleaning
the nozzle".
Dried residue is very difficult to remove and impairs
formation of the frothy milk.
Tip: Preferably use semiĆskimmed milk.
Preparing frothy milk