Gaggenau CM200610 - Manual (Page 27)

27
CAUTION
Clean the nozzle after each use.
q Place a suitable receptacle under the nozzle.
q Briefly set function selector to 0.
d CAUTION d
Avoid the risk of scalding!
When the function selector is set
to 0, the nozzle may spurt slightly.
Escaping water is very hot. Do not
touch nozzle or direct at people!
q Set function selector to u position.
q Wipe the outside of the nozzle after it has cooled
down.
q Dismantle the nozzle to clean thoroughly.
Proceed as follows:
q Unscrew the nozzle with a coin.
q In particular, clean the tip of the nozzle with
a brush and pointed implement.
q Clean all parts with hot water and detergent,
rinse and dry (dishwasherĆsafe).
Cleaning the nozzle