Gaggenau CM200610 - Manual (Page 17)

17
Changing settings / programming
The appliance has been set so that coffee can be
brewed without any additional programming.
These basic settings can be changed with the
function buttons under the display.
r Selection button
q Access to programming mode /
Save settings
o Terminate programming
s
Selection button
CAUTION
Do not switch off the appliance during
programming. Otherwise changes will
not be saved.
The appliance must be switched on before the
standard settings can be changed.
The following settings can be changed:
- Language
- Water hardness
- Filter
- Temperature
- Current time
- Timer function
- Energy saving mode
Factory settings have a grey background in this
chapter ć see example opposite.
Programming
LANGUAGE
ENGLISH