Geneva Lab FRESH BREW 3206 - Manual (Page 24)

22
G E N E V A
-
H O T B E V E R A G E M E R C H A N D I S E R • 3 2 0 5 • 3 2 0 6 • 4 2 1 4 8 0 3
INTERNAL KEYPAD FUNCTIONS
Figure 15
The internal keypad is used to carry out a number of frequently required machine functions without entering
Program mode.
In most cases a single press of the key initiates the function associated with each button. If a further key press is
necessary to end the action it will be the ESC (escape) key.
The functions available from the internal keypad are:
a)
ADVANCE COFFEE BREWER - If a coffee brewer is fitted, pressing this key one time will force the brewer
unit to index to its next position in the cycle. The purpose of this function is to allow the brewer to be locked
prior to a flush cycle so that cleaning agents can be added if desired.
b) MDB MECH DISPENSE COIN - This key provides a method of emptying the change tubes of an MDB coin
mechanism. On pressing the key the external display will change to:
EMPTY TUBE $0.05
З
,И ENTER OR ESC
The currency value shown will be that of the lower value coin tube in the mechanism. The function of the
EXTERNAL keys will change as described in Section 3 to allow actions to be performed on either the
internal or external keypad. Pressing ENTER will dispense a coin from the selected tube. Pressing Ç or È
selects the next/previous coin tube. Pressing the ESC (escape) key ends the process.
c) MDB MECH FILL TUBES - If an MDB coin mechanism is fitted this function allows the change tubes to be
filled. On pressing the key the external display will change to:
INSERT FLOAT
$0.00