Greenheck Fan USGF - Manual (Page 20)

Greenheck warrants this equipment to be free from defects in material and workmanship for a period
of one year from the purchase date. Any units or parts which prove defective during the warranty
period will be replaced at our option when returned to our factory, transportation prepaid. Motors are
warranted by the motor manufacturer for a period of one year. Should motors furnished by Greenheck
prove defective during this period, they should be returned to the nearest authorized motor service
station. Greenheck will not be responsible for any removal or installation costs.
As a result of our commitment to continuous improvement, Greenheck reserves the right to change
specifications without notice.
P.O. Box 410 • Schofield, WI 54476-0410 • Phone (715) 359-6171 • greenheck.com
Building Value in Air
Our Warranty
Prepared to Support
Green Building Efforts
Greenheck delivers value
to mechanical engineers by
helping them solve virtually
any air quality challenges
their clients face with a
comprehensive selection of top quality, innovative air-
related equipment. We offer
extra value to contractors
by providing easy-to-install,
competitively priced, reliable
products that arrive on time. And building owners and
occupants value the energy
efficiency, low maintenance
and quiet dependable operation
they experience long after the
construction project ends.
Catalog USGF Rev. 5 February 2008
Copyright © 2008 Greenheck Fan Corp.
Additional Grease
Exhaust Solutions
Series C models CUE, CUBE, CW and CWB are commonly used for
general clean air, mild grease and fume hood exhaust applications.
Both Roof Upblast and Sidewall configurations are specifically
designed to discharge air directly away from the mounting surface.
These models are constructed of aluminum and use an aluminum
backward inclined wheel. They are UL Listed for electrical or grease.
Performance capacities ranges up to 5 in. wg (1250 Pa) and up to
30,000 cfm (51,000 m
3 /hr).
Model SWB centrifugal backward inclined belt driven utility fans are
designed for supply, exhaust and return air applications requiring higher
discharge velocities and high static pressures. The SWB Series 100 is for
general clean air applicators. The SWB Series 200 fans are constructed
with heavy gauge steel. Designed for light industrial duty and grease
applications with capacities ranges up to 2,7000 cfm (45,900 m
3 /hr) and up
to 5 in. wg (1250 Pa) of static pressure. SWB fans can be mounted indoors
or outdoors.
Model TCB inline belt driven fans are the ideal choice for installations
with straight-through air flow in ducted systems. The wheels used are
designed to provide higher efficiencies and lower sound levels. The fan
itself can be mounted horizontally or vertically. Performance capacities
ranges up to 24,000 cfm (40,800 m
3 /hr) and up to 4 in. wg (1,000 Pa) of
static pressure.