GE DEH-210 - Manual (Page 13)

PMCS Interface Toolkit Configuring and Using PMCS Wizards
•
7
3. In the Project Properties window (Options tab), select the Enable project
broadcast checkbox if you will be using CIMPLICITY HMI view nodes.
Make sure the Computer name field matches the name of the host machine.
Disregard the Startup Timeout field and the General tab. Select OK to
open the CIMPLICITY HMI Project Wizard:
4. In the CIMPLICITY Project Wizard step 1 of 3 window, choose Finish to
complete the project setup.
5. The CIMPLICITY Workbench is displayed as shown below:
Double-click PMCS Power Builder to begin adding devices, and refer to PMCS
PowerBuilder - Configuring Advanced Wizards in the following section for details
on placing a PMCS Advanced Wizard in a CIMPLICITY project.