GE DEH-210 - Manual (Page 136)

130
•
Features of Tabular Data Screen Wizards PMCS Interface Toolkit
Power Quality Tab
EPM 7500/7600 Meter - Power Quality Tab
The Power Quality tab displays the following power quality values from the EPM
7500/7600.
Symmetric Components
•
Zero Sequence Phase and Magnitude for Current and Voltage
•
Positive Sequence Phase and Magnitude for Current and Voltage
•
Negative Sequence Phase and Magnitude for Current and Voltage
Disturbance Counts
•
Sag / Swell Counter
Relative Setpoints
•
Over KW Sliding Window Demand Status
•
Over Current Phase A Status
•
Over Current Phase B Status
•
Over Current Phase C Status
•
Over Voltage Unbalance Status
*Note: no color code is used for the Relative Setpoint Status.
The Power Quality tab also provides push buttons for performing the following
commands:
Reset Sag Swell Disturbance Counter – Resets Sag Swell Counter.
Enable/Disable Sag Swell – Enables or Disables Sag Swell Tracking.
Enable/Disable Over KW SWD – Enables or Disables Over Real Power Sliding
Window Demand for Relative Setpoint Tracking.