GE DEH-210 - Manual (Page 94)

88
•
Features of GE Large Faceplate Wizards PMCS Interface Toolkit
Screen Selected Description
1 - Total Power
•
KW Total
•
KVAR Total
•
KVA Total
•
PF Signed Total
2 - Three-Phase Measurements •
Vln a; Vln b: n/a when Voltage Mode is DELTA
•
Vln c: n/a when Voltage Mode is DELTA or SINGLE
•
Vln Avg: n/a when Voltage Mode is DELTA
•
Vll ab
•
Vll bc; Vll ca; Vll avg: n/a when Voltage Mode is SINGLE
•
Ia, Ib, I4, Iavg
•
Ic: n/a when Voltage Mode is SINGLE
•
V unbal
•
I unbal
•
Line Frequency
3 - Per-Phase Power •
KW a; KW b: n/a when Voltage Mode is DELTA
•
KW c: n/a when Voltage Mode is DELTA or SINGLE
•
KW Total
•
KVAR a; KVAR b: n/a when Voltage Mode is DELTA
•
KVAR c: n/a when Voltage Mode is DELTA or SINGLE
•
KVAR Total
•
KVA a; KVA b: n/a when Voltage Mode is DELTA
•
KVA c: n/a when Voltage Mode is DELTA or SINGLE
•
KVA Total
•
PF Signed a; PF Signed b: n/a when Voltage Mode is
DELTA
•
PF Signed c: n/a when Voltage Mode is DELTA or
SINGLE
4 - Energy •
KWh Import; KWh Export; KWh Total; KWh Net
•
KVARh Import; KVARh Export; KVARh Total; KVARh
Net
•
KVAh Total
•
KW Total Min; KVAR Total Min; KVA Total Min
•
KW Total Max; KVAR Total Max; KVA Total Max
5 - Symmetrical Components •
I ZeroSeqMag; I PosSeqMag; I NegSeqMag
•
V ZeroSeqMag; V PosSeqMag; V NegSeqMag
•
I ZeroSeqPhs; I PosSeqPhs; I NegSeqPhs
•
V ZeroSeqPhs; V PosSeqPhs; V NegSeqPhs
**NOTE: If the Sliding Demand Reset is initiated, or a SWD setup register is
changed, SWD values are “N/A” in the meter until the number of sub-intervals
specified in the #sub intervals setup register have expired. The 3-D faceplate and
Tabular wizard will display 0 for these values during this state.