GE DEH-210 - Manual (Page 149)

PMCS Interface Toolkit Features of Tabular Data Screen Wizards
•
143
The Inputs tab also provides push buttons for performing the following commands:
Reset Counters – Resets Digital Input Status Counters for SI1-8.
The Inputs tab also provides retentive memory inputs for the following:
Digital Input Names for SI1-8.
Analog Input Names for AI1-4. : n/a when doesn’t exist on the meter
Setup 1 Tab
EPM 7700 ION Meter - Setup 1 Tab
The Setup 1 tab displays the following demand values from the EPM 7700.
Power Settings
•
Volts Mode
•
Phase Order
•
Voltage Polarity for A, B, and C
•
Current Polarity for A, B, C, and Neutral
Transformer Ratio Settings
•
PT and CT Primary
•
PT and CT Secondary
•
Neutral CT Primary and Secondary
Communications
•
Baud Rate for Comm 1, 2, and 3.