Ringer tone - 2 ringer tone, Registration, Ringer tone – GE 21011 User Manual
Page 16: Area code, Tone / pulse, Time, Set tone / pulse, 1 tone 2 pulse
16
4. Press the OK soft key to save your selection, and return to the main
menu. The new ringer tone is displayed for two seconds.
NOTE:
Press the EXIT soft key to keep the previous setting and return to the
main menu screen.
HANDSET DISPLAY
BASE DISPLAY
T
ONE
/P
ULSE
Most telephone systems use tone dialing, however, some may still use
pulse dialing. Depending on your telephone system, set the dialing mode
as follows:
This setting may be made with the base only. Make sure the base is at the
main menu. Make sure your phone is OFF (not in TALK mode).
1. Press the CID (up or down arrow) button on the base to scroll to
TONE/PULSE.
2. Press the OK soft key and
SET TONE/PULSE 1TONE 2PULSE shows in
the display.
RINGER TONE - 2
RINGER TONE
OK
REGISTRATION
EXIT
RINGER TONE
OK
AREA CODE
EXIT
TONE / PULSE
OK
TIME
EXIT
SET TONE / PULSE
OK
1 TONE 2 PULSE
EXIT