GE 21011 - Manual (Page 42)

42
NOTE: If you don’t want to change or delete a number, simply press EXIT
soft key, or wait for one minute to exit the review mode.
D
IALING A
S
TORED
N
UMBER
H
ANDSET
Make sure the phone is ON by pressing the talk/callback button.
1. Press the DIR soft key.
2. Enter the memory location number (01-50) for the desired memory
location. The number will be dialed automatically.
-OR-
1. Make sure the phone is OFF (not in TALK mode).
2. Press the DIR soft key.
3. Press the number key (01-50) for the desired memory location or use the
cid/vol (up or down arrow) button to scroll through memory until the
desired number displays.
4. Press the talk/callback button. The number dials automatically.
B
ASE
Make sure the phone is ON by pressing the pressing the speaker/callback
button.
1. Press the DIR soft key.
2. Press the number key (01-50) for the desired memory location. The
number dials automatically.
-OR-
Make sure the phone is OFF (not in talk mode)
1. Press the DIR soft key.
2. Press the number key (01-50) for the desired memory location, or use
the CID (up or down arrow) button to scroll through memory until the
desired number displays.
3. Press the speaker/callback button. The number dials automatically.