GE 21011 - Manual (Page 30)

30
L
AST
N
UMBER
R
EDIAL
To quickly redial the last number you dialed:
1. Press the talk/callback button on the handset or the speaker/callback
button on the base.
2. Press the redial button.
-OR-
3. Press the redial button first then press the talk/callback button or the
speaker/callback button. If you get a busy signal and want to keep
dialing the number, press the redial button to quickly redial the number.
H
OLD
Press the HOLD soft key on the handset or base to put a call on hold. LINE
ON HOLD shows in the handset display.
Your phone stays on hold until you press the EXIT soft key and release the
line, or press the talk/callback button to return to standby mode. If you
continue the call on a separate extension phone, or other registered
handset your cordless phone releases the line to the extension phone.
If the handset with the call on hold is placed back on the cradle, the holding
call is transferred to the base speakerphone and the handset returns to
standby mode.
E
XIT
Press the EXIT soft key to end an operation, such as HOLD or
TRANSFER. The display shows
LINE ACTIVE for two seconds then
returns to the TALK mode.
LINE ON HOLD
CONF
TALK 00:10 VOL 2
EXIT TRANS