GE 21011 - Manual (Page 22)

22
W
ALKIE
T
ALKIE
This feature allows a pair of handsets to be used like walkie talkies
(electrical power to the base unit is not required for walkie talkie
operation). This setting may be made with the handset only. Make sure the
handset is at the main menu.
1. Press the cid/vol (up or down arrow) button to move the arrow to
WALKIE TALKIE.
2. Press the OK soft key and WALKIE TALKIE ENABLE? shows in the
display.
3. Press the OK soft key and WALKIE TALKIE ENABLED followed by WALKIE
TALKIE HANDSET# shows in the display.
NOTE: Both handsets must be in walkie talkie mode to send and receive.
4. Press the page/int button, and then enter the handset number/extension
you want to call. The selected handset is paged. When the page/int
button on the receiving handset is pressed, and the page is answered,
the walkie talkie feature is activated between both handsets. Both
handsets display
WALKIE TALKIE WITH HANDSET #.
DEREGISTRATION
WALKIE TALKIE
OK EXIT
WALKIE TALKIE
ENABLE ?
OK EXIT
WALKIE TALKIE
ENABLED
WALKIE TALKIE
HANDSET 1
EXIT