GE 21011 User Manual
Page 54
54
Dial tone is OK but can’t dial out
• Make sure the TONE/PULSE setting on the handset is set to the type of
phone service you are subscribed to.
Handset/Base does not ring
• Make sure the handset ringer is turned on and the base ringer is
programmed to HIGH.
• The cordless handset may be out of range of the base. Move closer to
the base.
• You may have too many extension phones on your line. Try unplugging
some phones.
• Check for dial tone.
You experience static, noise, or fading in and out
• The cordless handset may be out of range of the base. Move closer to
the base.
• Relocate the base. Make sure base is not plugged into an outlet with
another household appliance.
• Charge the battery.
Unit beeps
• Place the handset in the cradle for 20 seconds. If it still beeps, charge
battery for 12 hours.
• Clean charging contacts on cordless handset and charger with a soft
cloth or an eraser.
• See solutions for “No dial tone”.
• Replace the battery.