GE DECT6.0 28128 - Manual (Page 17)

17
ProGrAMMING INforMATIoN
The base and/or handset menus give you access to all of the built-in features.
NoTE: Menu settings on the handset and on the base are separate
and do not interface with each other, which means changing menu
settings on the base affects ONLY the settings on the base.
Press the Menu (SKL) button to display the menu options,
then press the
or button to navigate to the desired option.
Press the Select (SKL) button to activate a menu option. For details on programming,
refer to the applicable section. During programming, you may press the Back (SKR)
button at any time to exit the menu and keep the previous setting.
NoTE: You can press END/cancel button at any time to go back to
standby mode.
Text Entry:
Use the number keys to enter characters. More than one letter is stored in each of the
number keys. For example, press the  key twice for the letter B. Press the 1 key to
insert a space. Press the *TONE button to toggle between upper and lower case.
NoTE: If you make a mistake, use the DELETE/flash button to
backspace and delete one character at a time.
ProGrAMMING THE BASE
There are five programmable menus available: Answerer, Alarm, Phone Settings,
Sound Settings, and Bluetooth.
a
nswerer
In the Answerer Menu, there are five programmable submenus: Answerer On/Off,
Security Code, Message Alert, Rings to Answer and Message Length.
1. Make sure your base is off (not in talk mode).
. Press the Menu (SKL) button and Answerer shows on the display.
. Press the Select (SKL) button to enter the submenu.
Answerer on/off
This menu allows you to activate/deactivate the answering system.
from the Answerer menu:
1. Use the or button to scroll to Answerer On/Off.
. Press the Select (SKL) button to enter the submenu.