GE DECT6.0 28128 - Manual (Page 24)

4
b
luetooth
® s
etup
This unit supports a maximum of two Bluetooth cell phone devices. To use your
Bluetooth cell phone device with the 1 system, you must activate Bluetooth on
your device and then pair the device to the base.
NoTE: Your Bluetooth cell phone device should be within 2 feet
to 10 feet from the base. If the device is too close it may create
undesired noise. If device is too far it will not pair.
1. Make sure your base is off (not in talk mode).
. Press the Menu (SKL) button to enter the main menu.
. Use the
or button to scroll to Bluetooth.
4. Press the Select (SKL) button to enter the sub-menu. There are three
programmable menus: Connect, My Device, and My Base.
Connect (and Pair)
NoTE: when connecting for first time you must use the base menus
and not the quick Connect/Bluetooth button.
from the Bluetooth menu:
1. Use the or button to scroll to Connect.
. Press the Select (SKL) button to enter the menu.
(refer to the instruction manual for your cell phone device on the proper
procedure to add and pair a new device.)
the base displays connect; Please wait...,
. Use the number keys to enter the default PIN 0000 on your Bluetooth cell phone
device. When the device is paired successfully, the information shows on the base
display, e.g. NOKIA 6230 CONNECTED.
NoTE: If two cell phones have been registered, a prompt message
MAXIMUM DEVICES CONNECTED shows on the display.
My Devices
Change the device name or deregister a Bluetooth cell phone device from the base to
allow registration of another device.
from the Bluetooth menu:
1. Use the or button to scroll to My Devices.
. Press the Select (SKL) button to enter the sub-menu. A list of registered devices
shows on the display.