GE DECT6.0 28128 - Manual (Page 26)

6
4. Press the Select (SKL) button to enter the submenu, Alarm On/Off shows on the
display.
5. Use the or button to scroll to On or Off.
6. Press the Select (SKL) button to save your selection. You will hear a confirmation
tone.
Set Alarm Time
NoTE: Alarm must be activated to set time.
from the Alarm On menu:
1. Press the Select (SKL) button to enter the menu. Set Alarm shows on the display.
. Use the number keys to enter the time, then use the or button to select
AM or PM. The default setting is 12:00AM.
4. Press the Select (SKL) button to save your setting. You will hear a confirmation
tone.
Snooze
from the Alarm On menu:
1. Use the or button to scroll to Snooze: Off.
. Press the Select (SKL) button to enter the menu. Snooze On/Off shows on the
display.
. Use the or button to select from Off, Every 5 minutes, Every 10 minutes,
Every 15 mintues, or Every 30 minutes. Off is the default setting.
4. Press the Store (SKL) button to save your selection. You will hear a confirmation
tone.
Set Cycle Time
from the Alarm On menu:
1. Use the or button to scroll to Cycle: Once.
. Press the Select (SKL) button to enter the menu. Alarm shows on the display.
. Use the or button to select Once or Daily. The default setting is Once.
4. Press the Select (SKL) button to save your selection. You will hear a confirmation
tone.
NoTE: If you select Daily, the system will follow the current time
setting to turn on the alarm.