GM None Pontiac Aztek User Manual

Page 219

Advertising
background image

3. Once the desired PTY is displayed, press either

SEEK arrow to select the PTY and take you to
the PTY’s first station.

4. If you want to go to another station within that PTY

and the PTY is displayed, press either SEEK arrow
once. If the PTY is not displayed, press either
SEEK arrow twice to display the PTY and then to
go to another station.

5. Press P-TYPE to exit program type select mode.

If PTY times out and is no longer on the display,
go back to Step 1.

If both P-TYPE and TRAF are on, the radio will search
for stations with the selected PTY and traffic
announcements.

To use the PTY interrupt feature, press and hold the
P-TYPE button until you hear a beep on the PTY you
want to interrupt with. When selected, an asterisk will
appear beside that PTY on the display. You may select
multiple interrupts if desired. When you are listening to a
CD, the last selected RDS station will interrupt play if that
selected program type format is broadcast.

SCAN: You can scan the stations within a PTY by
performing the following:

1. Press the P-TYPE button to activate program type

select mode. P-TYPE and the last selected PTY will
appear on the display.

2. Turn the P-TYPE knob to select a PTY.

3. Once the desired PTY is displayed, press and hold

either SCAN arrow, and the radio will begin
scanning the stations in the PTY.

4. Press either SCAN arrow to stop at a station.

If both PTY and TRAF are on, the radio will scan for
stations with the selected PTY and traffic
announcements.

BAND (Alternate Frequency): Alternate frequency
allows the radio to switch to a stronger station with the
same program type. To turn alternate frequency on
press and hold BAND for two seconds AF ON will
appear on the display. The radio may switch to stronger
stations.

To turn alternate frequency off press and hold BAND
again for two seconds. AF OFF will appear on the
display. The radio will not switch to other stations. When
you turn the ignition off and then on again, the alternate
frequency feature will automatically be turned on.

This function does not apply for XM™ Satellite Radio
Service.

3-93

Advertising