Taillamps, stoplamps and back-up lamps, Taillamps, stoplamps and back-up lamps -54 – GM None Pontiac Aztek User Manual
Page 350
Advertising
Taillamps, Stoplamps and Back-up
Lamps
1. Open the liftgate and the tailgate.
2. Remove the two
screws from the
taillamp housing.
3. Turn the lamp outboard, then pull the assembly
firmly rearward.
A. Stop/Taillamps
B. Back-up Lamps
4. Unscrew the bulb socket from the lamp assembly
by pressing the tab while turning the bulb socket
counterclockwise.
5. Replace the bulb by pulling the old one out and
gently pushing the new one into the bulb socket.
5-54
Advertising