GM None Pontiac Aztek - Manual (Page 349)

Front Turn Signal, Sidemarker and
Parking Lamps
1. Open the hood.
2. Remove the two inboard screws attaching the lamp
to the fender bracket.
3. Unsnap the lamp assembly by lifting straight up.
4. Pull the lamp assembly away from the vehicle.
5. Unscrew the bulb socket from the lamp assembly by
pressing the tab while turning it counterclockwise.
6. Replace the bulb by pulling the old one out and
gently pushing the new one into the lamp socket.
7. Line up the tabs on the socket with the gaps in the
socket holes and screw the bulb socket back into
the lamp housing until a click is heard (the tab
popping back out).
8. To reinstall the lamp assembly, align the tapered
pin on the bottom of the lamp with the plastic
socket on the fender bracket. Push down until the
pin snaps into the socket.
9. Reinstall the two screws that were removed in
Step 2.
5-53