Installation instructions, Installation, Arrangement of fuel bed components – Stovax Riva Nemos 8627 MA User Manual

Page 16

Advertising
background image

16

4. ARRANGEMENT OF FUEL BED

COMPONENTS

ADVICE ON HANDLING AND DISPOSAL OF FIRE

CERAMICS

The fuel effect and side panels in this appliance are made

from Refractory Ceramic Fibre (RCF), a material which is

commonly used for this application.

Protective clothing is not required when handling these

articles, but we recommend you follow normal hygiene

rules of not smoking, eating or drinking in the work area

and always wash your hands before eating or drinking.

To ensure that the release of RCF fibres are kept to a

minimum, during installation and servicing a HEPA filtered

vacuum is recommended to remove any dust accumulated

in and around the appliance before and after working on it.

When servicing the appliance it is recommended that the

replaced items are not broken up, but are sealed within

heavy duty polythene bags and labelled as RCF waste.

RCF waste is classed as stable, non-reactive hazardous waste

and may be disposed of at a licensed landfill site.

Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.

4.1 Place log A on to the burner. Ensure the rear of the log

touches the rear of the burner. See diagram 3.

AR0816

3

CENTRALISE THE LOG BETWEEN THE BURNERPORTS AT

EITHER END.

Four of the remaining logs have location holes on the

underside. These locate on the studs at the front of the fire.

4.2 Place log D on the third stud from the left and resting at the

rear of log A. See diagram 4.

4

AR1194

4.3 Place log C on the second stud and resting at the rear on

log A. See diagram 5.

5

AR1195

4.4 Place log B on the first stud. The recess on the underside of

the log should locate on the top of log C. See diagram 6.

6

AR1196

4.5 Place log E on to the last stud. The recess on the underside

of the log should locate on to the top of log D. See diagram

7.

7

AR1197

4.6 Place log F resting on the rear tray and leaning forward to

locate in the recess in log E. See diagram 8.

INSTALLATION INSTRUCTIONS

INSTALLATION

Advertising
This manual is related to the following products: