User instructions, Flame failure device, Running in – Stovax Riva Nemos 8627 MA User Manual

Page 7: Servicing, Ventilation, Installation details, Hot surfaces

Advertising
background image

7

USER INSTRUCTIONS

10

AR1120

6.9 Ensure that the fibreglass seal on the back of the glass frame

is intact then hook the location tabs over the hooks on the

top of the firebox. Replace the nine screws working from

the top down. Tighten the screws evenly. DO NOT OVER

TIGHTEN. See diagram 2, section 5 "Cleaning the Nemos"

NEVER OPERATE THE APPLIANCE WHEN THE GLASS

PANEL IS REMOVED OR BROKEN.

6.10 Close the door by pushing shut centrally on the RH side.

NOTE: ENSURE THAT THE LOGS ARE POSITIONED AS

ABOVE. ONLY USE THE CORRECT AMOUNT OF LOGS

AS SPECIFIED IN THE DIAGRAMS.

7. FLAME FAILURE DEVICE

7.1 This is a safety feature incorporated on this appliance which

automatically switches off the gas supply if the pilot goes

out and fails to heat the thermocouple.

8. RUNNING IN

8.1 The surface coating on the logs used in your GAZCO fire

will "burn off" during the first few hours of use producing a

harmless and temporary odour. This will disappear after a

short period of use. If the odour persists, ask your installer

for advice.

9. SERVICING

9.1 The fire must be serviced every 12 months by a qualified

Gas Engineer. In all correspondence always quote the

Model number and the Serial number which may be found

on the databadge.

10. VENTILATION

10.1 This appliance requires no additional ventilation.

11. INSTALLATION DETAILS

11.1 To assist in any future correspondence, your installer should

have completed the commissioning sheet at the front of this

book, this records the essential installation details of the

appliance. In all correspondence always quote the Model

number and Serial number.

12. HOT SURFACES

12.1 Parts of this appliance become hot during normal use. It is

therefore recommended that a suitable fire guard be used

for protection of young children and the infirm. Indeed, all

parts of the appliance should be treated as a 'working

surface' except for the control access panel.

Advertising
This manual is related to the following products: