Stovax Riva Nemos 8627 MA - Manual (Page 21)

21
2.3 Remove the ceramic logs and the embers.
2.4 Carefully slide the ceramic sides forward and store safely.
See diagram 3.
3
AR0759
2.5 Remove the screws from the log support. The feed pipe nut
is now visible between the burner and the angled base of
the firebox. See diagram 4, arrow A.
AR0818
4
2.6 Undo the feed pipe nut and the four screws holding the
burner to the tray. See diagram 4, arrow B. The burner,
complete with the feed pipe, can now be removed.
2.7 To replace the burner, locate the feed pipe onto the brass
fitting and loosely fit the nut. DO NOT TIGHTEN THE NUT
AT THIS STAGE. Replace the four burner fixing screws,
tighten the feed pipe nut.
2.8 Light the appliance and check for leaks.
1. GENERAL
1.1 All principal components can be replaced without removing
the appliance from its installation, although it is essential
that the gas supply to the appliance is turned off at the
isolation device before proceeding further.
1.2 If for any reason the flue has to be removed from the
appliance, the seal must be replaced in the inner spigot.
2. MAIN BURNER
2.1 Open the front door of the appliance and turn the gas
supply off at the isolation device, see diagram 1.
AR1294
1
2.2 Remove the glass frame see diagram 2.
2
AR0816
SERVICING INSTRUCTIONS
REPLACING PARTS