Installation instructions, Installation, Fitting the door – Stovax Riva Nemos 8627 MA User Manual

Page 17

Advertising
background image

17

INSTALLATION INSTRUCTIONS

INSTALLATION

AR1198

8

4.7 Place log G at the front of the fire between logs D and E.

DO NOT PLACE THIS LOG ON THE BURNER. IT IS ONLY

TO FILL THE GAP BETWEEN LOGS D AND E. The charred

effect should face the rear of the fire. See diagram 9.

AR1199

9

4.8 With the granules fill the front compartment around the logs

evenly. ENSURE NO GRANULES FALL ON THE BURNER.

See diagram 10.

10

AR1120

NOTE: ENSURE THAT THE LOGS ARE POSITIONED

AS ABOVE. ONLY USE THE CORRECT AMOUNT OF

LOGS AS SPECIFIED IN THE DIAGRAMS.

5. FITTING THE DOOR

5.1 Ensure that the fibreglass seal on the back of the glass frame

is intact then hook the location tabs over the hooks on the

top of the firebox. Replace the nine screws working from

the top down. Tighten the screws evenly. DO NOT OVER

TIGHTEN. See diagram 11.

NEVER OPERATE THE APPLIANCE WHEN THE GLASS

PANEL IS REMOVED OR BROKEN.

5.2 Close the front door of the appliance by pushing centrally

on the RH side, the door catch should locate in the closing

mechanism and finish in the closed position.

5.3 It may be necessary to re-adjust the door closing

mechanism due to vibration whilst in transit. Vertical

adjustment should be made by loosening the two nuts

directly above and below the locking mechanism on the RH

internal side of the outer body. See diagram 11.

AR1295

11

5.4 Horizontal adjustment should be made by loosening the

two bolts, which hold the locking catch to the rear of the

door. See diagram 22.

AR1296

22

Advertising
This manual is related to the following products: