9 setting the time and date, Disk end out – GE 0150-0255C User Manual

Page 10

Advertising
background image

Kalatel VDR

1-6

0150-0255C

Disk End Out

The Disk End Out is activated when there is 5 minutes of
recording space left on the hard disk. The VDR must be in
Record mode and set to Continuous Overwrite mode.

Output: Open Collector
High: Transistor Off
Low: Transistor On
Active When On.
Current Out:
10mA Max

Minimum Duration: 0.5 Seconds

1.9 Setting the Time and Date

It is recommended that, as a minimum, the following menu items be configured before using the unit.
For detailed information about using the menu system, see section 3.

o

Main Menu

→ Time/Date → Set Time Format

Time Format Setup

Select Format

12 Hour

To set the Time format, use the Arrow buttons to select the desired
Time format. Format the time as either:

12 HOUR

24 HOUR

Press the Enter button to confirm the selection and exit the menu.

--OR—

Press the Menu button to exit the menu without making changes.

o

Main Menu

→ Time/Date → Set Date Format

Date Format Setup

Select Format

MM/DD/YY

To set the Date format, use the Arrow buttons to select the desired Date
format. Format the Date as either:

DD/MM/YY

MM/DD/YY

YY/MM/DD

Press the Enter button to confirm the selection and exit the menu.

--OR—

Press the Menu button to exit the menu without making changes.

Advertising