GE 0150-0255C - Manual (Page 35)

0150-0255C 4-11 Kalatel VDR
o Main Menu
→ CompactFlash → Retrieve
Once this command is selected the CompactFlash Retrieve Search Filters Menu will appear.
Use this to specify:
•
The Start and Stop date of
the search.
•
The Start and Stop time of
the search.
•
Whether to search for an
alarm.
Searching for All Recorded Events
Using the Arrow buttons to navigate, highlight [START SEARCH], then press the Enter button. The
Search Results window will appear. For information about selecting a recorded event, see Selecting
from the Search Results, in this section
Selecting a Start and Stop Date
1. Using the Right or Left Arrow buttons to navigate, highlight the DATE parameter, then press the
Enter button. The unit will enter Edit mode.
2. Use the Up or Down Arrow buttons to change the start and stop date values. Use the Right or
Left Arrow buttons to navigate among the different parameters.
3. To activate the start or stop date parameter, use the Up or Down Arrow buttons to place an
[X] in the check box.
4. Press the Enter button at any time to exit Edit mode.
Selecting a Start and Stop Time
1. Using the Right or Left Arrow buttons to navigate, highlight the TIME parameter, then press the
Enter button. The unit will enter Edit mode.
2. Use the Up or Down Arrow buttons to change the start and stop time values. Use the Right or
Left Arrow buttons to navigate among the different parameters.
Compact Flash Retrieve Search Filters
Start Stop
DATE: 10/21/03 [ ] 10/21/03 [ ]
(MM/DD/YY) (MM/DD/YY)
Start Stop
TIME: 15:09:47 [ ] 15:09:47 [ ]
ALARM: [ ]