Grundig GDP 3564 - Manual (Page 11)

ENGLISH
11
CONNECTION AND PREPARATION
_
Connecting with an HDMI cable*
(digital audio/video signal)
1 Plug a standard HDMI cable into the » HDMI « socket of the
DVD player and into the corresponding socket of the television or
flat screen (audio/video signal).
Note:
Only for testing, open the disc compartment with »
ə
« on the
DVD Player and enter »3308« with the numeric keys » 1 … 0 «
on the remote control to switch the HDMI output to ON or OFF
mode.
Note:
Many televisions or flat screens don’t have a decoder for AC3
or DTS integrated. In this case please open the »Sound« menu
and switch the digital output of the DVD player to PCM.
*HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.”
HDMI IN
100-240 V~
50/60 Hz 15 W
EURO AV TV S VIDEO OUT
DIGITAL AUDIO OUT AUDIO OUT
Pr/Cr Y Pb/Cb
R L HDMI OUT
VIDEO OUT
EURO AV S VIDEO OUT
DIGITAL AUDIO OUT AUDIO OUT
Pr/Cr Y Pb/Cb
R L HDMI OUT
VIDEO OUT
GDP 3564,GB 26.10.2005 12:49 Uhr Seite 11