Grundig GDP 3564 - Manual (Page 44)

44
You can also operate GRUNDIG televisions with this remote control. The fun-
ctions available to you depend on the model of the GRUNDIG television.
Point the remote control directly at the TV.
TV Switches the remote control to television operation.
To do this, press and hold down »
TV « then press the
relevant button for the desired function.
Ǽ
Switches off the television set (stand-by).
1 … 0 Switches the television on from standby mode.
Selects the television channel directly.
»
0 « Selects the preset stations» A V «.
In teletext mode: for entering the three-figure page
number.
v Picture in picture.
E b
Calls up the ”Picture Format” menu.
n Calls up the concise TV help menu.
d Switches the sound on or off (mute).
i Calls up the ”DIALOG CENTER” or switches to menu
operation.
x Switches between the two most recently selected chan-
nels (zapping).
a s Volume setting, » a « lower, » s « higher.
In menu mode: » a « cursor left, » s « cursor right.
OK Activates functions, calls up data, confirms and saves
data.
A S Select TV channels, » A « up, » S « down.
In menu mode: » A « cursor up, » S « cursor down.
TXT . Switches from TV mode to teletext mode and back.
TV-G Title Switches the TV Guide on and off.
5 In teletext mode: Returns to the previous page.
6 In teletext mode: Advances to the next page.
m In teletext mode: Switches to the next topic.
, In teletext mode: Switches to the next chapter.
F
Calls up the sound menu.
z y Call up the ”Picture” menu.
TELEVISION REMOTE CONTROL
_______
Tele Pilot 81 D
TV
Title
GDP 3564,GB 26.10.2005 12:49 Uhr Seite 44