Grundig GDP 3564 - Manual (Page 16)

16
CONNECTION AND PREPARATION
_
Connecting an audio system with analogue two-
channel stereo sound
1 Plug a standard cinch cable into the » R AUDIO OUT L «
socket of the DVD player and into the corresponding socket on
the audio system.
Caution:
Do not connect the » R AUDIO OUT L « socket on the DVD
player to the PHONO (record player) input socket on the audio
system.
Connecting the power cord
1 Plug the mains cable supplied into the » 100-240 V~ « socket
on the back of the DVD player.
2 Plug the mains cable into the wall socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices.
Inserting batteries in the remote control
1 Open the battery compartment by pressing the snap-catch, and
remove the lid.
2 When inserting the batteries (Micro type, e.g. R06 or AA,
2 x 1.5 V), observe the polarity marked on the battery compart-
ment.
3 Close the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control
commands, the batteries may be flat. Be sure to remove used
batteries. The manufacturer accepts no liability for damage
resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, may
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
100-240 V~
50/60 Hz 15 W
EURO AV S VIDEO OUT
DIGITAL AUDIO OUT AUDIO OUT
Pr/Cr Y Pb/Cb
R L HDMI OUT
VIDEO OUT
100-240 V~
50/60 Hz 15 W
EURO AV TV S VIDEO OUT
DIGITAL AUDIO OUT AUDIO OUT
Pr/Cr Y Pb/Cb
R L HDMI OUT
VIDEO OUT
R L
AUDIO
INPUT
GDP 3564,GB 26.10.2005 12:49 Uhr Seite 16