Getting started – Grundig GDP 3564 User Manual
Page 18
18
GETTING STARTED
_______________________________
Selecting the video output socket
(EURO AV/RGB or S-Video)
The video output of your DVD player has been set at the factory to
»RGB«.
When you connect your DVD-Player to the television, flat screen or
projector using a Y/C cable (»
S-VIDEO OUT
« socket on the DVD
player) or using a cinch cable (»
Y
«, »
Pb/Cb
« and »
Pr/Cr
«
sockets on the DVD player), you will need to set the video output for
the video signal and the image to be relayed to the television.
Notes:
If you cannot see the settings menu, connect the »
VIDEO
OUT
« socket on the DVD player to the corresponding socket
(VIDEO IN) on the television using a cinch cable.
1
Call up the main menu with »
i
«.
2
Select the »Picture« menu item with »
a
« or »
s
« and activate
with »
OK
«.
3
Select »Video output« with »
S
« or »
A
« and activate with
»
OK
«.
4
Select the desired video output with »
S
« or »
A
« and con-
firm with »
OK
«.
– »S-Video« for the »
S-VIDEO OUT
« socket;
»YUV« for the »
EURO AV
➞
TV
« socket;
»RGB« for the »
EURO AV
➞
TV
« socket;
»YPbPr« for the »
Y
«, »
Pb/Cb
« and »
Pr/Cr
« sockets.
5
Press »
i
« to conclude the setting.
Notes:
If the television has been connected to the »
S-VIDEO OUT
«
socket, no picture will appear. Keep pressing »
x
« until the
picture appears.
The video output is set to »S-Video«.
Installation
Picture
Sound
Child Lock
TV Format
TV Standard
HDMI Resolution
Video Output
4:3 LB
PAL
576p
RGB
HD JPEG Mode
HD JPEG
S-Video
YUV
JPEG Interval
5 Seconds
RGB
YPbPr
GDP 3564,GB 26.10.2005 12:49 Uhr Seite 18