Installation instructions, Fitting and removal of the fire bricks – Stovax Riva Plus Midi Wood & Multi-fuel User Manual
Page 22
22
INsTAllATIoN INsTRUCTIoNs
PR8057
Upper Baffle
Lower Baffle
5.3 Remove the lower Baffle (see diagram) by lifting the front
edge to unhook it from the support bars
• Pull the baffle forward to disengage the rear edge from
the location above air inlet holes
• Rotate the baffle to remove from the firebox through the
door opening.
PR8058
Lower Baffle
5.4 Next, remove the Upper Baffle (see diagram) by pulling
forward to disengage it from the hanging points at the top
of the firebox
• Rotate the baffle to remove it from the firebox through
the door opening.
5.5 Reverse the above process to replace the baffles
PR8059
Upper Baffle
do not modify the baffle
6. FITTING ANd ReMoVAl oF
THe FIRe BRICKs
6.1 Remove the firebricks as part of the routine maintenance.
This can be carried out without the use of tools.
6.2 Allow the appliance to cool fully before removing firebricks.
6.3 Take care when handling, as bricks can become fragile after
use. Life span depends on the type of fuels burnt and the
level of use.
• Replace damaged bricks as soon as possible
6.4 Remove the baffles and grate system
• Remove secondary air facia plate screws using a
pozidrive screwdriver
• Remove the bricks in the correct order as shown in
Diagrams 11 and 12
PR8118
1
3
4
6
7
8
5
2
RIVA PlUs sMAll
PR8061
1
2
5
8
7
9
3
6
4
RIVA PlUs lARGe